ISO Standards Testing Equipment

ATOMIC ABSORPTION SPECTROMETER

Further Information About "Atomic Absorption Systems"

Brookfield viscometers employ the well-known principle of rotational viscometry; they measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in the sample fluid. The torque is proportional to the viscous drag on the immersed spindle, and thus to the viscosity of the fluid. For the user, rotational viscometry has several advantages:

Further Information About "Brookfield Viscometers"

2000 SERIES

Further Information About "Digital Thermometers"

A multi-chamber kiln that offers 9 chambers which can have temperature and profiles independently set making it ideal for ceramic testing. The gradient kiln offers a quick method of testing a single product at different temperatures or variety of products at the same temperature or a combination of both

Further Information About "Gradient Kiln 1300 C & 1400 C for ceramic testing"

The latest development in High Shear Laboratory mixing — the new Silverson L5 Series — is ideal for all laboratory work, research and development, QA analysis and small scale production in all industries.

Further Information About "High Shear Mixers - Homogenisers - Stirrers"

We offer a wide range of General-purpose laboratory ovens, with a temperature range of between 40 — and 600C.

Further Information About "Laboratory Ovens"

A powerful IKA RW20 laboratory stirrer ideally suited to mixing batches of viscous materials. The new RW20 has many technical improvements on the trusted RW 20 series designs This is a tough laboratory work horse that will give years of trouble free working life

Further Information About "Laboratory Stirrers / Mixers"

The Linseis Economy Dilatometer series L76 was developed to be used for CTE measurements in ceramics testing, such as brick and tile industry, porcelain industries and industries manufacturing building materials. It is also widely used for quality control purposes in ceramics and in metal industries. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis Dilatometer"

The Linseis Differential Scanning Calorimeter PT 1 is a well proven DSC system. It is a highly precise instrument and the principle of operation is based on heat flux between the sample and the reference. The heat flux is measured while the temperature is changing. The sensors that are used are highest precision PT100 sensors, which are able to directly measure a changing resistance. The used PT100 has a very high sensitivity and can be calibrated very accurately. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis DSC Differential Scanning Calorimetry"

The Linseis DTA uses a dynamic measuring principle. It can measure endothermal and exothermal heat flows between the sample and the reference. These heat flows are result of physical or chemical changes of the samples. Very often a DTA is used for purity measurements of mixtures of metals. This is due to the fact that the melting point changes in dependence to differing amounts of impurities Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis DTA Differential Thermal Analysis"

The LINSEIS STA PT1600 HP (simultaneous thermal analysis) can be used to determine simultaneous changes of mass Thermogravimetry (TG) and caloric reactions Differential Scanning Calorimeter (DSC) of a sample in the temperature range RT up to 1750°C. Furthermore the entire system can withstand a pressure of up to 2 or 5 bar at any temperature. The pressure is controlled through a unique pressure control system. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis High Pressure Thermobalance / STA"

The Linseis Horizontal Research Dilatometer series L75H was developed to meet the demands of the research laboratories worldwide including ceramics and steel industry applications. This line of Dilatometers is capable of measurements under vacuum, oxidizing and reducing atmospheres (except 2000°C graphite furnace). This series has built in an automatic pressure control with digital display. Anderen Ltd are the official UK representatives for Linseis GmbH Sample pressure is very important, to accurately measure the CTE values under different pressure conditions.

Further Information About "Linseis L75 Series Dilatometers"

The LINSEIS L81-I (simultaneous thermal analysis) can be used to determine simultaneous changes of mass Thermogravimetry (TG) and caloric reactions Differential Scanning Calorimeter (DSC) of a sample in the temperature range RT up to 1750°C. The model L81 Research Balance is a well proofed Thermal Balance, which is built up very robust. The balance can handle large sample sizes of 25 gram / 3 ml sample volume. This balance series can be used for many different furnace types from low temperatures -150°C up to +2400°C. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis L81Series Research Balance"

The Linseis STA PT1000 is a top loading Thermobalance, which offers a highly user-friendly design. Even at a sample weight of up to10g the Tare is done electronically. The specially designed furnaces allow fast heating and cooling rates as well as a highly precise temperature control. The system can be optionally equipped with a coupling device for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation studies. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis Simultaneous Thermogravimetry - DSC - STA (TG-DTA/DSC)"

The Linseis STA PT1600 is a top loading Thermobalance, which offers a highly user-friendly design. Even at a sample weight of up to 5 or 25g the Tara is done electronically. The specially designed furnaces allow fast heating and cooling rates as well as a highly precise temperature control. The system can be optionally equipped with a coupling device for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation studies. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis STA PT1600 (TG — DTA/DSC)High End STA"

The Linseis Vertical Research Dilatometer series L75V was developed to meet the demands of the research laboratories worldwide including ceramics and steel industry applications. This line of Dilatometers is capable of measurements under vacuum, oxidizing and reducing atmospheres (except 2000°C / 2400°C graphite furnace). This series has a built in automatic pressure control with digital display. Sample pressure is very important, to accurately measure the CTE values under different pressure conditions. A special rate controlled sintering software L75/RCS was developed to measure the Sintering behavior. Sample pressure is very important, to accurately measure the CTE values under different pressure conditions. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis Vertical Dilatometer"

The ESS Optical Dilatometer offers Dilatometric analysis up to the material’s melting point! Triple the number of tests per day Double accuracy, no calibration nor correction calculations Reduced sample preparation time Supplied in UK through Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Optical Dilatometer"

The ESS DTA is a single investment for differential thermal and thermo-mechanical analyses! • It doubles the number of tests per day! • It saves times in the sample preparation! • Test freedom, with or without crucible! • Possibility of tests on samples taken from the production! Supplied in the UK by Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Differential Thermal Analysis"

The ESS Heating Microscope is a single instrument for softening tests and surface tension! It allows twice the number of tests per day Double accuracy, no calibration nor correction calculations Time saving specimen preparation Expert Systems Solutions are supplied in the UK through Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Heating Microscope"

The Expert Systems Solutions Misura Hot Stage Microscope is a single instrument for softening and surface tension tests Analysis using industrial firing cycles allowing twice the number of tests per day Double accuracy, no calibration nor correction calculations Reduced time in the specimen preparation! Supplied in the UK by Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Hot Stage Microscope"

The Misura Optical Dilatometer manufactured by Expert Systems Solutions offers dilatometric analysis up to the material’s melting point and can triple the number of tests that can be done each day Analysis with industrial thermil cycles, double accuracy, no calibration or correction calculations required Sample preparation time is reduced. Supplied in the UK through Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Optical Dilatometer"

The Expert Systems Solutions Optical Fleximeter is a single instrument for flexural and pyroplasticity tests Allows twice the number of tests per day with double accuracy, no calibration or correction calculations required Supplied in the UK by Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Optical Fleximeter"

The Ohaus Moisture Testing Balance is designed for rapid testing of moisture content in ceramic materials

Further Information About "Ohaus MB45 Moisture Analyser"

Photometer - Palintest 7000 a simple instrument that allows testing of a wide variety of water test requirements for environmental monitoring, either in a laboratory or on site. The instrument does not require highly skilled staff and relies on simple tabletised reagents making testing to high levels of accuracy very simple

Further Information About "Photometer 7500 system"

The NEW IMPROVED SA-4000+ Scanning Analyser is the worlds only portable meter capable of accurately measuring the level of Lead and Cadmium from ceramics and glass metal release tests. BENEFITS *Simple to use by any competent technician *Lead and Cadmium test done simultaneously using a single use electrode *Requires no special laboratory facilities *Self calibrated *Faster turn around of results compared with outsourcing *Low per test cost *Low capital outlay quick return on investment ANDEREN LTD ARE THE SOLE WORLDWIDE DISTRIBUTOR FOR THE SA4000+ Scanning Analyser

Further Information About "Scanning Analyser for Lead and Cadmium in Ceramics and Glassware Testing"

The Torsion Viscometer (formerly called the Gallenkamp Torsion Viscometer or the Universal Torsion Viscometer) has been used in ceramic testing to measure the viscosity and thixotropy of ceramic slips and glazes all over the world for over 50 years The torsion viscometer is an easy to use and easy to maintain instrument that offers repeatable results with low operator skill and will have a long working life

Further Information About "Torsion Viscometer (Universal or Gallenkamp type) for ceramic testing"

Quality control, standards compliance, increase yields. From raw materials to finished product – we work with you for the best results.

Producing ceramics is a multi-stage process. Control throughout this process reduces faults and improves yields. Finished product needs testing to confirm it meets international standards.

All ceramic testing needs to be accurate and repeatable, you need the best equipment available.

With over 30 years experience supplying testing solutions worldwide, we have the products and the understanding of the requirements of international ceramic test standards, raw material testing and in process control.

Do you need a turn key project with product and application training, we are your one stop shop Our product range includes equipment for sanitaryware, tableware, tiles, high tech ceramics, and raw material testing.