ISO Standards Testing Equipment

The future of Thermophysical Property Measurements Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Laser Flash Thermal Constant Analyzer"

Unmatched resolution and absolute accuracy is now possible due to the new development of the Linseis Laser Dilatometer of the Pico-series. As the name indicates already the resolution goes up to Picometers (0,3nm = 300 Picometer). That means resolutions can be obtained which are up to a factor 33,33 higher as the resolution that were possible up to date. On top the principle of interference measurement give the possibility for much higher accuracy's, especially as some special computer calibrations are used. Up to now absolute accuracy's of 1% were normal, with best accuracy's up to 100nm. The new method allows accuracy's up to 30nm. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Laser Maximum Precision Laser Dilatometer, resolution 0.3 Nanometer "

The Linseis Economy Dilatometer series L76 was developed to be used for CTE measurements in ceramics testing, such as brick and tile industry, porcelain industries and industries manufacturing building materials. It is also widely used for quality control purposes in ceramics and in metal industries. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis Dilatometer"

The Linseis Differential Scanning Calorimeter PT 1 is a well proven DSC system. It is a highly precise instrument and the principle of operation is based on heat flux between the sample and the reference. The heat flux is measured while the temperature is changing. The sensors that are used are highest precision PT100 sensors, which are able to directly measure a changing resistance. The used PT100 has a very high sensitivity and can be calibrated very accurately. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis DSC Differential Scanning Calorimetry"

The Linseis DTA uses a dynamic measuring principle. It can measure endothermal and exothermal heat flows between the sample and the reference. These heat flows are result of physical or chemical changes of the samples. Very often a DTA is used for purity measurements of mixtures of metals. This is due to the fact that the melting point changes in dependence to differing amounts of impurities Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis DTA Differential Thermal Analysis"

The LINSEIS STA PT1600 HP (simultaneous thermal analysis) can be used to determine simultaneous changes of mass Thermogravimetry (TG) and caloric reactions Differential Scanning Calorimeter (DSC) of a sample in the temperature range RT up to 1750°C. Furthermore the entire system can withstand a pressure of up to 2 or 5 bar at any temperature. The pressure is controlled through a unique pressure control system. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis High Pressure Thermobalance / STA"

This product was specifically developed to meet all TMA measurements under highest temperatures (RT up to +1600°C) Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis High Temperature TMA"

The Linseis Horizontal Research Dilatometer series L75H was developed to meet the demands of the research laboratories worldwide including ceramics and steel industry applications. This line of Dilatometers is capable of measurements under vacuum, oxidizing and reducing atmospheres (except 2000°C graphite furnace). This series has built in an automatic pressure control with digital display. Anderen Ltd are the official UK representatives for Linseis GmbH Sample pressure is very important, to accurately measure the CTE values under different pressure conditions.

Further Information About "Linseis L75 Series Dilatometers"

The LINSEIS L81-I (simultaneous thermal analysis) can be used to determine simultaneous changes of mass Thermogravimetry (TG) and caloric reactions Differential Scanning Calorimeter (DSC) of a sample in the temperature range RT up to 1750°C. The model L81 Research Balance is a well proofed Thermal Balance, which is built up very robust. The balance can handle large sample sizes of 25 gram / 3 ml sample volume. This balance series can be used for many different furnace types from low temperatures -150°C up to +2400°C. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis L81Series Research Balance"

Linseis LSR-3 (SEB Seebeck/Electric Resistivity) Temperature range -100 up to 500°C and RT up to 800°C. or 1100°C Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis LSR-3 (SEB Seebeck/Electric Resistivity)"

The Linseis STA PT1000 is a top loading Thermobalance, which offers a highly user-friendly design. Even at a sample weight of up to10g the Tare is done electronically. The specially designed furnaces allow fast heating and cooling rates as well as a highly precise temperature control. The system can be optionally equipped with a coupling device for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation studies. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis Simultaneous Thermogravimetry - DSC - STA (TG-DTA/DSC)"

The Linseis STA PT1600 is a top loading Thermobalance, which offers a highly user-friendly design. Even at a sample weight of up to 5 or 25g the Tara is done electronically. The specially designed furnaces allow fast heating and cooling rates as well as a highly precise temperature control. The system can be optionally equipped with a coupling device for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation studies. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis STA PT1600 (TG — DTA/DSC)High End STA"

Thermo mechanical analysis (TMA) easily and rapidly measures sample displacement (growth, shrinkage, movement, etc.) as a function of temperature, time, and applied force. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis Thermo Mechanical Analysis"

This TMA was specifically developed to measure the CTEs of Polymers and Resins in the temperature range -30 to +70°C. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis TMA"

The Linseis Vertical Research Dilatometer series L75V was developed to meet the demands of the research laboratories worldwide including ceramics and steel industry applications. This line of Dilatometers is capable of measurements under vacuum, oxidizing and reducing atmospheres (except 2000°C / 2400°C graphite furnace). This series has a built in automatic pressure control with digital display. Sample pressure is very important, to accurately measure the CTE values under different pressure conditions. A special rate controlled sintering software L75/RCS was developed to measure the Sintering behavior. Sample pressure is very important, to accurately measure the CTE values under different pressure conditions. Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis Vertical Dilatometer"

Easy and cost effective Thermal Diffusivity Measurement Anderen Ltd are the official UK representatives for Linseis GmbH

Further Information About "Linseis Xenon Flash Termal Constant Analyzer"

The ESS Optical Dilatometer offers Dilatometric analysis up to the material’s melting point! Triple the number of tests per day Double accuracy, no calibration nor correction calculations Reduced sample preparation time Supplied in UK through Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Optical Dilatometer"

The ESS DTA is a single investment for differential thermal and thermo-mechanical analyses! • It doubles the number of tests per day! • It saves times in the sample preparation! • Test freedom, with or without crucible! • Possibility of tests on samples taken from the production! Supplied in the UK by Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Differential Thermal Analysis"

The ESS Heating Microscope is a single instrument for softening tests and surface tension! It allows twice the number of tests per day Double accuracy, no calibration nor correction calculations Time saving specimen preparation Expert Systems Solutions are supplied in the UK through Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Heating Microscope"

The Expert Systems Solutions Misura Hot Stage Microscope is a single instrument for softening and surface tension tests Analysis using industrial firing cycles allowing twice the number of tests per day Double accuracy, no calibration nor correction calculations Reduced time in the specimen preparation! Supplied in the UK by Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Hot Stage Microscope"

The Misura Optical Dilatometer manufactured by Expert Systems Solutions offers dilatometric analysis up to the material’s melting point and can triple the number of tests that can be done each day Analysis with industrial thermil cycles, double accuracy, no calibration or correction calculations required Sample preparation time is reduced. Supplied in the UK through Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Optical Dilatometer"

The Expert Systems Solutions Optical Fleximeter is a single instrument for flexural and pyroplasticity tests Allows twice the number of tests per day with double accuracy, no calibration or correction calculations required Supplied in the UK by Anderen Ltd Expert Systems Solutions Instruments can be combined to offer an economic solution where multi-parameter testing is required

Further Information About "MISURA Optical Fleximeter"

Quality control, standards compliance, increase yields. From raw materials to finished product – we work with you for the best results.

Producing ceramics is a multi-stage process. Control throughout this process reduces faults and improves yields. Finished product needs testing to confirm it meets international standards.

All ceramic testing needs to be accurate and repeatable, you need the best equipment available.

With over 30 years experience supplying testing solutions worldwide, we have the products and the understanding of the requirements of international ceramic test standards, raw material testing and in process control.

Do you need a turn key project with product and application training, we are your one stop shop Our product range includes equipment for sanitaryware, tableware, tiles, high tech ceramics, and raw material testing.